File Explorer

/proc/thread-self/root/proc/thread-self/root/proc/1/task/1/cwd/node24/include/node/openssl

This explorer reads the filesystem of the server it runs on, so /workspace/user isn't present here. Browsing and the terminal still work against this server's own disk from /.

ssl3.h12.4 KB · 358 lines
/* * Copyright 1995-2025 The OpenSSL Project Authors. All Rights Reserved. * Copyright (c) 2002, Oracle and/or its affiliates. All rights reserved * * Licensed under the Apache License 2.0 (the "License").  You may not use * this file except in compliance with the License.  You can obtain a copy * in the file LICENSE in the source distribution or at * https://www.openssl.org/source/license.html */ #ifndef OPENSSL_SSL3_H#define OPENSSL_SSL3_H#pragma once #include <openssl/macros.h>#ifndef OPENSSL_NO_DEPRECATED_3_0#define HEADER_SSL3_H#endif #include <openssl/comp.h>#include <openssl/buffer.h>#include <openssl/evp.h>#include <openssl/ssl.h> #ifdef __cplusplusextern "C" {#endif /* * Signalling cipher suite value from RFC 5746 * (TLS_EMPTY_RENEGOTIATION_INFO_SCSV) */#define SSL3_CK_SCSV 0x030000FF /* * Signalling cipher suite value from draft-ietf-tls-downgrade-scsv-00 * (TLS_FALLBACK_SCSV) */#define SSL3_CK_FALLBACK_SCSV 0x03005600 #define SSL3_CK_RSA_NULL_MD5 0x03000001#define SSL3_CK_RSA_NULL_SHA 0x03000002#define SSL3_CK_RSA_RC4_40_MD5 0x03000003#define SSL3_CK_RSA_RC4_128_MD5 0x03000004#define SSL3_CK_RSA_RC4_128_SHA 0x03000005#define SSL3_CK_RSA_RC2_40_MD5 0x03000006#define SSL3_CK_RSA_IDEA_128_SHA 0x03000007#define SSL3_CK_RSA_DES_40_CBC_SHA 0x03000008#define SSL3_CK_RSA_DES_64_CBC_SHA 0x03000009#define SSL3_CK_RSA_DES_192_CBC3_SHA 0x0300000A #define SSL3_CK_DH_DSS_DES_40_CBC_SHA 0x0300000B#define SSL3_CK_DH_DSS_DES_64_CBC_SHA 0x0300000C#define SSL3_CK_DH_DSS_DES_192_CBC3_SHA 0x0300000D#define SSL3_CK_DH_RSA_DES_40_CBC_SHA 0x0300000E#define SSL3_CK_DH_RSA_DES_64_CBC_SHA 0x0300000F#define SSL3_CK_DH_RSA_DES_192_CBC3_SHA 0x03000010 #define SSL3_CK_DHE_DSS_DES_40_CBC_SHA 0x03000011#define SSL3_CK_EDH_DSS_DES_40_CBC_SHA SSL3_CK_DHE_DSS_DES_40_CBC_SHA#define SSL3_CK_DHE_DSS_DES_64_CBC_SHA 0x03000012#define SSL3_CK_EDH_DSS_DES_64_CBC_SHA SSL3_CK_DHE_DSS_DES_64_CBC_SHA#define SSL3_CK_DHE_DSS_DES_192_CBC3_SHA 0x03000013#define SSL3_CK_EDH_DSS_DES_192_CBC3_SHA SSL3_CK_DHE_DSS_DES_192_CBC3_SHA#define SSL3_CK_DHE_RSA_DES_40_CBC_SHA 0x03000014#define SSL3_CK_EDH_RSA_DES_40_CBC_SHA SSL3_CK_DHE_RSA_DES_40_CBC_SHA#define SSL3_CK_DHE_RSA_DES_64_CBC_SHA 0x03000015#define SSL3_CK_EDH_RSA_DES_64_CBC_SHA SSL3_CK_DHE_RSA_DES_64_CBC_SHA#define SSL3_CK_DHE_RSA_DES_192_CBC3_SHA 0x03000016#define SSL3_CK_EDH_RSA_DES_192_CBC3_SHA SSL3_CK_DHE_RSA_DES_192_CBC3_SHA #define SSL3_CK_ADH_RC4_40_MD5 0x03000017#define SSL3_CK_ADH_RC4_128_MD5 0x03000018#define SSL3_CK_ADH_DES_40_CBC_SHA 0x03000019#define SSL3_CK_ADH_DES_64_CBC_SHA 0x0300001A#define SSL3_CK_ADH_DES_192_CBC_SHA 0x0300001B /* a bundle of RFC standard cipher names, generated from ssl3_ciphers[] */#define SSL3_RFC_RSA_NULL_MD5 "TLS_RSA_WITH_NULL_MD5"#define SSL3_RFC_RSA_NULL_SHA "TLS_RSA_WITH_NULL_SHA"#define SSL3_RFC_RSA_DES_192_CBC3_SHA "TLS_RSA_WITH_3DES_EDE_CBC_SHA"#define SSL3_RFC_DHE_DSS_DES_192_CBC3_SHA "TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA"#define SSL3_RFC_DHE_RSA_DES_192_CBC3_SHA "TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA"#define SSL3_RFC_ADH_DES_192_CBC_SHA "TLS_DH_anon_WITH_3DES_EDE_CBC_SHA"#define SSL3_RFC_RSA_IDEA_128_SHA "TLS_RSA_WITH_IDEA_CBC_SHA"#define SSL3_RFC_RSA_RC4_128_MD5 "TLS_RSA_WITH_RC4_128_MD5"#define SSL3_RFC_RSA_RC4_128_SHA "TLS_RSA_WITH_RC4_128_SHA"#define SSL3_RFC_ADH_RC4_128_MD5 "TLS_DH_anon_WITH_RC4_128_MD5" #define SSL3_TXT_RSA_NULL_MD5 "NULL-MD5"#define SSL3_TXT_RSA_NULL_SHA "NULL-SHA"#define SSL3_TXT_RSA_RC4_40_MD5 "EXP-RC4-MD5"#define SSL3_TXT_RSA_RC4_128_MD5 "RC4-MD5"#define SSL3_TXT_RSA_RC4_128_SHA "RC4-SHA"#define SSL3_TXT_RSA_RC2_40_MD5 "EXP-RC2-CBC-MD5"#define SSL3_TXT_RSA_IDEA_128_SHA "IDEA-CBC-SHA"#define SSL3_TXT_RSA_DES_40_CBC_SHA "EXP-DES-CBC-SHA"#define SSL3_TXT_RSA_DES_64_CBC_SHA "DES-CBC-SHA"#define SSL3_TXT_RSA_DES_192_CBC3_SHA "DES-CBC3-SHA" #define SSL3_TXT_DH_DSS_DES_40_CBC_SHA "EXP-DH-DSS-DES-CBC-SHA"#define SSL3_TXT_DH_DSS_DES_64_CBC_SHA "DH-DSS-DES-CBC-SHA"#define SSL3_TXT_DH_DSS_DES_192_CBC3_SHA "DH-DSS-DES-CBC3-SHA"#define SSL3_TXT_DH_RSA_DES_40_CBC_SHA "EXP-DH-RSA-DES-CBC-SHA"#define SSL3_TXT_DH_RSA_DES_64_CBC_SHA "DH-RSA-DES-CBC-SHA"#define SSL3_TXT_DH_RSA_DES_192_CBC3_SHA "DH-RSA-DES-CBC3-SHA" #define SSL3_TXT_DHE_DSS_DES_40_CBC_SHA "EXP-DHE-DSS-DES-CBC-SHA"#define SSL3_TXT_DHE_DSS_DES_64_CBC_SHA "DHE-DSS-DES-CBC-SHA"#define SSL3_TXT_DHE_DSS_DES_192_CBC3_SHA "DHE-DSS-DES-CBC3-SHA"#define SSL3_TXT_DHE_RSA_DES_40_CBC_SHA "EXP-DHE-RSA-DES-CBC-SHA"#define SSL3_TXT_DHE_RSA_DES_64_CBC_SHA "DHE-RSA-DES-CBC-SHA"#define SSL3_TXT_DHE_RSA_DES_192_CBC3_SHA "DHE-RSA-DES-CBC3-SHA" /* * This next block of six "EDH" labels is for backward compatibility with * older versions of OpenSSL.  New code should use the six "DHE" labels above * instead: */#define SSL3_TXT_EDH_DSS_DES_40_CBC_SHA "EXP-EDH-DSS-DES-CBC-SHA"#define SSL3_TXT_EDH_DSS_DES_64_CBC_SHA "EDH-DSS-DES-CBC-SHA"#define SSL3_TXT_EDH_DSS_DES_192_CBC3_SHA "EDH-DSS-DES-CBC3-SHA"#define SSL3_TXT_EDH_RSA_DES_40_CBC_SHA "EXP-EDH-RSA-DES-CBC-SHA"#define SSL3_TXT_EDH_RSA_DES_64_CBC_SHA "EDH-RSA-DES-CBC-SHA"#define SSL3_TXT_EDH_RSA_DES_192_CBC3_SHA "EDH-RSA-DES-CBC3-SHA" #define SSL3_TXT_ADH_RC4_40_MD5 "EXP-ADH-RC4-MD5"#define SSL3_TXT_ADH_RC4_128_MD5 "ADH-RC4-MD5"#define SSL3_TXT_ADH_DES_40_CBC_SHA "EXP-ADH-DES-CBC-SHA"#define SSL3_TXT_ADH_DES_64_CBC_SHA "ADH-DES-CBC-SHA"#define SSL3_TXT_ADH_DES_192_CBC_SHA "ADH-DES-CBC3-SHA" #define SSL3_SSL_SESSION_ID_LENGTH 32#define SSL3_MAX_SSL_SESSION_ID_LENGTH 32 #define SSL3_MASTER_SECRET_SIZE 48#define SSL3_RANDOM_SIZE 32#define SSL3_SESSION_ID_SIZE 32#define SSL3_RT_HEADER_LENGTH 5 #define SSL3_HM_HEADER_LENGTH 4 #ifndef SSL3_ALIGN_PAYLOAD/* * Some will argue that this increases memory footprint, but it's not * actually true. Point is that malloc has to return at least 64-bit aligned * pointers, meaning that allocating 5 bytes wastes 3 bytes in either case. * Suggested pre-gaping simply moves these wasted bytes from the end of * allocated region to its front, but makes data payload aligned, which * improves performance:-) */#define SSL3_ALIGN_PAYLOAD 8#else#if (SSL3_ALIGN_PAYLOAD & (SSL3_ALIGN_PAYLOAD - 1)) != 0#error "insane SSL3_ALIGN_PAYLOAD"#undef SSL3_ALIGN_PAYLOAD#endif#endif /* * This is the maximum MAC (digest) size used by the SSL library. Currently * maximum of 20 is used by SHA1, but we reserve for future extension for * 512-bit hashes. */ #define SSL3_RT_MAX_MD_SIZE 64 /* * Maximum block size used in all ciphersuites. Currently 16 for AES. */ #define SSL_RT_MAX_CIPHER_BLOCK_SIZE 16 #define SSL3_RT_MAX_EXTRA (16384) /* Maximum plaintext length: defined by SSL/TLS standards */#define SSL3_RT_MAX_PLAIN_LENGTH 16384/* Maximum compression overhead: defined by SSL/TLS standards */#define SSL3_RT_MAX_COMPRESSED_OVERHEAD 1024 /* * The standards give a maximum encryption overhead of 1024 bytes. In * practice the value is lower than this. The overhead is the maximum number * of padding bytes (256) plus the mac size. */#define SSL3_RT_MAX_ENCRYPTED_OVERHEAD (256 + SSL3_RT_MAX_MD_SIZE)#define SSL3_RT_MAX_TLS13_ENCRYPTED_OVERHEAD 256 /* * OpenSSL currently only uses a padding length of at most one block so the * send overhead is smaller. */ #define SSL3_RT_SEND_MAX_ENCRYPTED_OVERHEAD \    (SSL_RT_MAX_CIPHER_BLOCK_SIZE + SSL3_RT_MAX_MD_SIZE) /* If compression isn't used don't include the compression overhead */ #ifdef OPENSSL_NO_COMP#define SSL3_RT_MAX_COMPRESSED_LENGTH SSL3_RT_MAX_PLAIN_LENGTH#else#define SSL3_RT_MAX_COMPRESSED_LENGTH \    (SSL3_RT_MAX_PLAIN_LENGTH + SSL3_RT_MAX_COMPRESSED_OVERHEAD)#endif#define SSL3_RT_MAX_ENCRYPTED_LENGTH \    (SSL3_RT_MAX_ENCRYPTED_OVERHEAD + SSL3_RT_MAX_COMPRESSED_LENGTH)#define SSL3_RT_MAX_TLS13_ENCRYPTED_LENGTH \    (SSL3_RT_MAX_PLAIN_LENGTH + SSL3_RT_MAX_TLS13_ENCRYPTED_OVERHEAD)#define SSL3_RT_MAX_PACKET_SIZE \    (SSL3_RT_MAX_ENCRYPTED_LENGTH + SSL3_RT_HEADER_LENGTH) #define SSL3_MD_CLIENT_FINISHED_CONST "\x43\x4C\x4E\x54"#define SSL3_MD_SERVER_FINISHED_CONST "\x53\x52\x56\x52" /* SSL3_VERSION is defined in prov_ssl.h */#define SSL3_VERSION_MAJOR 0x03#define SSL3_VERSION_MINOR 0x00 #define SSL3_RT_CHANGE_CIPHER_SPEC 20#define SSL3_RT_ALERT 21#define SSL3_RT_HANDSHAKE 22#define SSL3_RT_APPLICATION_DATA 23 /* Pseudo content types to indicate additional parameters */#define TLS1_RT_CRYPTO 0x1000#define TLS1_RT_CRYPTO_PREMASTER (TLS1_RT_CRYPTO | 0x1)#define TLS1_RT_CRYPTO_CLIENT_RANDOM (TLS1_RT_CRYPTO | 0x2)#define TLS1_RT_CRYPTO_SERVER_RANDOM (TLS1_RT_CRYPTO | 0x3)#define TLS1_RT_CRYPTO_MASTER (TLS1_RT_CRYPTO | 0x4) #define TLS1_RT_CRYPTO_READ 0x0000#define TLS1_RT_CRYPTO_WRITE 0x0100#define TLS1_RT_CRYPTO_MAC (TLS1_RT_CRYPTO | 0x5)#define TLS1_RT_CRYPTO_KEY (TLS1_RT_CRYPTO | 0x6)#define TLS1_RT_CRYPTO_IV (TLS1_RT_CRYPTO | 0x7)#define TLS1_RT_CRYPTO_FIXED_IV (TLS1_RT_CRYPTO | 0x8) /* Pseudo content types for SSL/TLS header info */#define SSL3_RT_HEADER 0x100#define SSL3_RT_INNER_CONTENT_TYPE 0x101 /* Pseudo content types for QUIC */#define SSL3_RT_QUIC_DATAGRAM 0x200#define SSL3_RT_QUIC_PACKET 0x201#define SSL3_RT_QUIC_FRAME_FULL 0x202#define SSL3_RT_QUIC_FRAME_HEADER 0x203#define SSL3_RT_QUIC_FRAME_PADDING 0x204 #define SSL3_AL_WARNING 1#define SSL3_AL_FATAL 2 #define SSL3_AD_CLOSE_NOTIFY 0#define SSL3_AD_UNEXPECTED_MESSAGE 10 /* fatal */#define SSL3_AD_BAD_RECORD_MAC 20 /* fatal */#define SSL3_AD_DECOMPRESSION_FAILURE 30 /* fatal */#define SSL3_AD_HANDSHAKE_FAILURE 40 /* fatal */#define SSL3_AD_NO_CERTIFICATE 41#define SSL3_AD_BAD_CERTIFICATE 42#define SSL3_AD_UNSUPPORTED_CERTIFICATE 43#define SSL3_AD_CERTIFICATE_REVOKED 44#define SSL3_AD_CERTIFICATE_EXPIRED 45#define SSL3_AD_CERTIFICATE_UNKNOWN 46#define SSL3_AD_ILLEGAL_PARAMETER 47 /* fatal */ #define TLS1_HB_REQUEST 1#define TLS1_HB_RESPONSE 2 #define SSL3_CT_RSA_SIGN 1#define SSL3_CT_DSS_SIGN 2#define SSL3_CT_RSA_FIXED_DH 3#define SSL3_CT_DSS_FIXED_DH 4#define SSL3_CT_RSA_EPHEMERAL_DH 5#define SSL3_CT_DSS_EPHEMERAL_DH 6#define SSL3_CT_FORTEZZA_DMS 20/* * SSL3_CT_NUMBER is used to size arrays and it must be large enough to * contain all of the cert types defined for *either* SSLv3 and TLSv1. */#define SSL3_CT_NUMBER 12 #if defined(TLS_CT_NUMBER)#if TLS_CT_NUMBER != SSL3_CT_NUMBER#error "SSL/TLS CT_NUMBER values do not match"#endif#endif /* No longer used as of OpenSSL 1.1.1 */#define SSL3_FLAGS_NO_RENEGOTIATE_CIPHERS 0x0001 /* Removed from OpenSSL 1.1.0 */#define TLS1_FLAGS_TLS_PADDING_BUG 0x0 #define TLS1_FLAGS_SKIP_CERT_VERIFY 0x0010 /* Set if we encrypt then mac instead of usual mac then encrypt */#define TLS1_FLAGS_ENCRYPT_THEN_MAC_READ 0x0100#define TLS1_FLAGS_ENCRYPT_THEN_MAC TLS1_FLAGS_ENCRYPT_THEN_MAC_READ /* Set if extended master secret extension received from peer */#define TLS1_FLAGS_RECEIVED_EXTMS 0x0200 #define TLS1_FLAGS_ENCRYPT_THEN_MAC_WRITE 0x0400 #define TLS1_FLAGS_STATELESS 0x0800 /* Set if extended master secret extension required on renegotiation */#define TLS1_FLAGS_REQUIRED_EXTMS 0x1000 /* 0x2000 is reserved for TLS1_FLAGS_QUIC (internal) *//* 0x4000 is reserved for TLS1_FLAGS_QUIC_INTERNAL (internal) */ #define SSL3_MT_HELLO_REQUEST 0#define SSL3_MT_CLIENT_HELLO 1#define SSL3_MT_SERVER_HELLO 2#define SSL3_MT_NEWSESSION_TICKET 4#define SSL3_MT_END_OF_EARLY_DATA 5#define SSL3_MT_ENCRYPTED_EXTENSIONS 8#define SSL3_MT_CERTIFICATE 11#define SSL3_MT_SERVER_KEY_EXCHANGE 12#define SSL3_MT_CERTIFICATE_REQUEST 13#define SSL3_MT_SERVER_DONE 14#define SSL3_MT_CERTIFICATE_VERIFY 15#define SSL3_MT_CLIENT_KEY_EXCHANGE 16#define SSL3_MT_FINISHED 20#define SSL3_MT_CERTIFICATE_URL 21#define SSL3_MT_CERTIFICATE_STATUS 22#define SSL3_MT_SUPPLEMENTAL_DATA 23#define SSL3_MT_KEY_UPDATE 24#define SSL3_MT_COMPRESSED_CERTIFICATE 25#ifndef OPENSSL_NO_NEXTPROTONEG#define SSL3_MT_NEXT_PROTO 67#endif#define SSL3_MT_MESSAGE_HASH 254#define DTLS1_MT_HELLO_VERIFY_REQUEST 3 /* Dummy message type for handling CCS like a normal handshake message */#define SSL3_MT_CHANGE_CIPHER_SPEC 0x0101 #define SSL3_MT_CCS 1 /* These are used when changing over to a new cipher */#define SSL3_CC_READ 0x001#define SSL3_CC_WRITE 0x002#define SSL3_CC_CLIENT 0x010#define SSL3_CC_SERVER 0x020#define SSL3_CC_EARLY 0x040#define SSL3_CC_HANDSHAKE 0x080#define SSL3_CC_APPLICATION 0x100#define SSL3_CHANGE_CIPHER_CLIENT_WRITE (SSL3_CC_CLIENT | SSL3_CC_WRITE)#define SSL3_CHANGE_CIPHER_SERVER_READ (SSL3_CC_SERVER | SSL3_CC_READ)#define SSL3_CHANGE_CIPHER_CLIENT_READ (SSL3_CC_CLIENT | SSL3_CC_READ)#define SSL3_CHANGE_CIPHER_SERVER_WRITE (SSL3_CC_SERVER | SSL3_CC_WRITE) #ifdef __cplusplus}#endif#endif